6006 Zirconia Ceramic Deep Groove Ball Bearings 30x55x13mm

  • $112.80
  • Save $179.00

6000 Series Zirconia Ceramic Ball Bearings

Zirconia Ceramic Ball Bearings are designed for applications where high loads, high speeds and extreme temperatures are factors.

  • These extra light, high precision 6000 Series ball bearings require low running torque and are normally used in applications where space limitations are a primary consideration and shaft sizes are relatively large.
  • This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads.
  • Silicon Nitride is non-porous, non-magnetic, non corrosive, lighter than steel and, in ball form, is harder than steel.
  • Long life and the need for minimal lubrication make this material appropriate for extreme applications with a service life 2-5 times longer than steel.
  • Ceramic balls are non-porous meaning they are virtually frictionless and are capable of spinning faster than steel balls.


  • Brand: Fushi
  • Model No: 6006 Full Ceramic
  • Inner Diameter/Bore (b): 30mm
  • Outer Diameter (D): 55mm
  • Width (B): 13mm
  • Fillet Radius (r): 1mm
  • Materials: Zirconia Ceramic (ZrO2)
  • Quantity: 1 Piece
  • Surface Roughness: Ra 0.05
  • Structure: Deep Groove
  • Coatings: Non-magnetic
  • Density: 3.2g/cm2
  • Fracture Toughness: 6 MPa
  • Heat Resistance: 800°C
  • Three Point Bending Strength: 1 100 MPa
  • Mass: 0.089kg

We Also Recommend